Showing posts with label 25 Millimeter. Show all posts
Showing posts with label 25 Millimeter. Show all posts

27 November 2013

The Toolbox Part 2: Painting and Assembling Pewter Miniatures

In the second, and very late, Toolbox post I'll be going over the necessary tools for painting and assembling miniatures, most of which you can find at your Friendly Local Gaming Store (FLGS).  The first thing is of course paints and brushes.  Like the table in the last post, this one is pretty obvious, but the quality of brushes is very important.  Look for Red Sable for the brush material.  Your FLGS will have some quality brushes, but I've found that an art supply store will have a better variety and generally better prices.  Liners and round brushes are the most commonly useful, but a few larger brushes for base coating can also be handy.  Size 5/0 is generally the smallest you'll need, and the largest isn't necessarily much bigger.

Brushes and Hemostats!
Get a nice pair of hemostats as well.  You'll need them for holding your models while you paint them.  Grabbing them with your finger generally causes the paint to rub off, and re-basing can add ridges and lines that you don't want.  A table vise can also come in handy for larger pieces.  Remember though that hemostats have teeth in the jaws, so you don't want to risk denting your pewter by grabbing a piece that will be visible when you're done.

YARR!
For initial prep work, like removing mold flash and smoothing out seams, a hobby knife and a set of needle files will serve you well.  This first step is forgotten by many new painters and is crucial to giving your finished paint a clean and realistic look.  Plus, needle files are cheap at a hobby store.

$12
 The last thing you'll need is a pin vise and appropriately sized bits and wire to assemble the finished model.  Getting the right sizes to match with your technique will take some experimentation and trial and error but you'll get it eventually.  I use a #68 bit and 16 or 18 gauge modeling wire.  They don't fit together exactly, but I do like to have some wiggle room when assembling minis.

Pin Vise
I'll cover how to pin and why super glue without wire is bad in an upcoming post.

Happy building!

17 September 2013

First!

Hi, and welcome to Escapism, where I talk about miniatures that I make for tabletop and board games, especially Dungeons & Dragons, Pathfinder, ShadowRun, Descent: Journeys in the Dark and many others.

The hobby started just before Christmas 2011 when I found Hirst Arts and decided to try my hand at casting and building structures from plaster.  As it turns out this is a very fun hobby and I seem to have a talent for precision work with hard plasters like dental stone and UltraCal.  Over the next year or so my skill grew and I began to branch out into pewter and plastic miniatures and began incorporating different materials into my work.  

After much learning and much building (and much gaming with the finished products) I've made it here with the goal to expand my skills by communicating with the greater community of model builders and at the same time maybe teach someone something about the craft.  Here we go!